Water intake operation of lift and how to avoid aging

Views:1067 Time:2021-10-26

If the lift is used for high-altitude work, when the equipment rises to the height, the equipment usually has a swing amplitude, different types of equipment have different amplitudes in the sky, and the swing amplitude is normal within 5 degrees, when we

If the lift is used for high-altitude work, when the equipment rises to the height, the equipment usually has a swing amplitude, different types of equipment have different amplitudes in the sky, and the swing amplitude is normal within 5 degrees, when we buy When installing equipment, the smaller the swing at the same height, the better. Generally speaking, the scissor lift is better than the aluminum alloy lift.

Hydraulic lifting platform is easy to adversely affect the performance of hydraulic lifting platform, affecting the normal operation and work of hydraulic system, especially the hydraulic lifting platform installed outdoors. For customers in southern regions, the annual rainy season enters the rainy season. For this common problem , very obviously, tells you what to do after the hydraulic lift platform is in the water.

After entering the water, the motor of the fixed lifting platform will burn the lifting platform and damage the lifting platform. At this time, the power switch should be turned off immediately, the water in the pit should be cleaned, and the height of the hydraulic lifting platform should be kept as high as possible, so as to discharge the water entering the exhaust pipe, so as to avoid damage to the conversion muffler and muffler.

The oil condition of each system of the hydraulic lifting platform should be checked, and the foaming and turbidity of the oil should be replaced in time. After the test is completed, the hydraulic lifting platform manufacturer reminds you that a compressed air should be used to purge all electrical appliances in the head compartment. Connection parts to prevent water from accumulating in electrical connection parts and causing corrosion.

If water has entered the motor of the hydraulic lifting platform, the motor should be removed and disassembled so that the water can evaporate quickly, which is a very fast method for dehumidification in summer. During the wading process, the on-site components are easy to cause lubricating oil. Deterioration, especially in steering lifts and drivetrains, should be subject to on-site disassembly and assembly inspections.

In addition to maintenance and upkeep, elevators cannot avoid aging. Now, as the number increases, the maintenance cost of elevators is very high. Due to the different time of aging parts, the advantage of elevators is to use durable places and then enter the waste line.

One part of the lift is the seal, which is short for one year, if it is slow, it needs to be replaced every three years, the two easily damaged places are the oil pipelines, the lift thinks that the external force is often under pressure, so in 3 years, there will be cracks around , oil leakage, sometimes burst, aging The third possibility is the single bearing, they are responsible for connecting and manipulating the transformation of various components, these components will be under a lot of pressure, for your safety, we do not Hope you use the mobile lift after the lift has passed service.



举升机