The vehicle-mounted lifting platform manufacturer of the automobile lifting platform supplier fixes the lifting platform on the battery truck or truck, and borrows the chassis platform underframe of various models. Support leg styles are divided into hydraulic automatic type and manual screw type.
Precautions for the use of car lift platforms:
1. The user unit should arrange a special person to operate the lift, formulate the details of the use of the lift according to the situation of its own unit, and hang it in a conspicuous position. Operators must pass the training and assessment of the statutory management department and obtain the qualification certificate before they can operate the platform.
2. Before working every day, the driver should carefully check whether the electrical system, hydraulic system and mechanical system of the platform are normal, and try to run the platform up and down with no load for several times to check whether there are any faults and abnormal phenomena. There are no abnormal gaps in the landing accuracy.
3. The driver will ring the bell after locking the movable doors at both ends of the guardrail before work. It is strictly forbidden to work with the movable doors of the guardrail open. If the platform is running, the emergency stop switch can be used to stop the platform, but in normal operation, it is prohibited to use the emergency stop switch to stop the platform.
4. When the lifting operation platform fails or fails to work properly, the maintenance personnel should be notified to repair it immediately. If it is found to be dangerous or may cause personal and mechanical accidents, it should be stopped immediately, the main power supply of the machine room should be cut off, and the management department should be reported to the management department. Only available after recovery and detailed inspection
5. The driver is strictly prohibited from leaving the post and cleaning, lubricating or repairing the platform during the work of the lifting platform. When the work is completed, the driver should cut off the power supply, lock the control panel before leaving the post, and fill in the shift record.
6. The driver should be responsible for supervising that the items transported by the platform are distributed as evenly as possible on the platform to prevent partial load. Lifts are not allowed to carry and transport flammable and explosive and other dangerous goods, and it is forbidden for people to climb and shake when they are elevated.
